Welcome to www.FANUCRobotics.comFANUC Robotics Home
Welcome to www.FANUCRobotics.com
Welcome to www.FANUCRobotics.com
Welcome to www.FANUCRobotics.com
Welcome to www.FANUCRobotics.comIntelligent Robot Solutions
Welcome to www.FANUCRobotics.com
 
Skip Navigation Links
Careers   Contact Us
     
 
 

ArcTool Operation and Programming

32 CONTACT HOURS

The course covers the tasks and procedures that an operator, technician, engineer or programmer needs to set up and program a FANUC Robotics ArcTool Software Package.

Course Code: J2P0410

Course Objectives: Students successfully completing this course will be able to:

  • Safely power up the robot from a complete shutdown
  • Manipulate the robot using the teach pendant
  • Setup and test robot movement parameters for a given work cell and torch
  • Setup ArcTool for specific weld applications
  • Create and test weld programs for a given weld task
  • Edit weld programs in teach mode
  • Setup and save to file management devices
    Manipulate I/O in program logic and real logic
  • Master and calibrate the robot
  • Recommended safety procedures are integrated into all training exercises.

The course consists of lectures, demonstrations, and a series of lab exercises designed to reinforce what the student has learned.

In addition to lab exercises, a pretest and posttest are used to measure mastery of objectives.

Audience: This course is intended for the person who must set up and record a program on a R-J, R-J2, or R-J3 controlled robot with an ArcTool software package.

Prerequisites: None
   
We reserve the right to cancel or modify classes at any time.

 

 

 
 
     
  © Copyright 2012 FANUC Robotics America Corporation. All rights reserved.   Follow us