| |
|
|
| |
Loading Robot Unloads Large Injection Mold Machine |
|
| |
A FANUC Robotics six axis M-710iB/70T top-loader robot pulls a molded plastic part from a large plastic injection molding cell. The M-710iB/70T then carries the part to a table and performs an automated tool change. The robot trims and removes any plastic gating from the part with a cutting tool. After all gating has been removed; the robot performs another tool change and relocates the part to an out feed conveyor to complete the cycle. This automated process then starts over with a new molded plastic part. The FANUC iRVision system is a ready-to-use robotic vision package, available on all FANUC robots, requiring only a camera and cable – no additional processing hardware.
Learn more about FANUC Robotics' full line of Loading Robots |
|
| |
|
|
| |
|
|
| |
Key Technology Demonstrated |
|
| |
M-710 iB/70T Robot
- Combines the advantages of a linear gantry (large, scaleable work envelope with limited floorspace requirements) and a FANUC six-axis articulated robot (dexterity, high reliability and maintainability).
- Services multiple vertical and/or horizontal machines.
- Adapts easily to existing plant layouts.
- Improves machine productivity by as much as 30 percent.
- “Best in class” wrist moments and inertia meet a variety of heavy handling challenges.
- Proven reliable FANUC Servo drives provide the highest uptime and productivity.
- Robust mechanical design reduces down time, increases mean time between failure.
- High performance motion yields fast cycle times and high throughput.
- Fully integrated iRVision system delivers high performance 2-D and 3-D machine vision capabilities with FANUC reliability.
|
|
| |
< Back to FANUC Robotics Application Case Studies |
|
| |
|
|