FANUC America Corporation


Robot Applications

A FANUC LR Mate 200iC robot is shown vacuum picking foam pads from a roll and placing them on insulin pumps using iRVision.

A FANUC LR Mate 200iC robot loads and unloads aluminum extrusion housings for an LED based linear floodlight from a CNC machine.

A FANUC M-710iC robot palletizes 2 cases at a time in a fully automated palletizing system. This system is capable of palletizing two different product lines and stretch wrap them in the same robotic pallet cell.

Three FANUC R-2000iA robots are part of an automated die casting process for lawn and garden components. Cooled parts are placed into a trimming press by one of the robots.

A FANUC LR Mate 200iC is shown picking pre-assembled insulin vials from a pallet. The robot places the insulin vials into an eight position dial driven by a pneumatic indexer.

A FANUC M-6iB/6S robot deburring and polishing rifle receivers. The robot grips the receiver on one end and a high speed 40,000 rpm spindle deburs the part.

A FANUC M-20iA robot with a vacuum gripper picking and palletizing cases at a rate of up to 40 cases per minute. The robot easily handles multiple pallet patterns and case sizes.

Features M-410iB and R-2000iB robots case packing and palletizing products. A FANUC M-410iB with a double vacuum gripper, case packs bags of garden products.

A FANUC M-710iC robot loading and unloading multiple machine tools. The 50kg M-710iC robot offers a good combination of reach and payload for machine tool load and unload.

A FANUC M-710iT robot loading multiple machine tools. The M-710iT top loader robots have a 70 kg payload. A dual part gripper is used for the machine tool unload to speed up the cycle time required to remove the parts.